Upgrade your power with this 12.8V 60Ah LiFePO4 battery. Built with premium
4S4P cells, it delivers 768Wh of energy, supports a massive 50A continuous discharge,
and lasts 2000+ cycles. Weighing just 5.6kg, it's the perfect lightweight, drop-in
replacement for lead-acid batteries in RVs, solar systems, and marine setups.
Brand:
SuperpackItem NO.:
SPF12V60-SMProduct Origin:
ChinaColor:
BlueLead Time:
25-30 Working DaysFAQ
Q1: Can it replace my old lead-acid battery?
A: Yes. It's a direct drop-in replacement, but weighs 1/3 as much and lasts 5x longer.
Q2: Can I run a 600W inverter with this?
A: Yes. With a 50A continuous discharge, it easily handles up to 640W loads.
Q3: Can I charge it in freezing weather?
A: No. Never charge below 0°C (32°F). However, discharging down to -20°C is safe.
Q4: Can I connect multiple batteries together?
A: Yes, for parallel or series connections. Just ensure the voltage difference is <0.1V before connecting.
Q5: How long will this battery actually last?
A: With daily use, it will last over 5.5 years while retaining 80% of its capacity.
Q6: What charger do I need?
A: Use a LiFePO4-specific charger (14.4V-14.6V cutoff). Never use a standard lead-acid charger.
| Item | General Parameter | Remark |
| Rated Capacity | 60.0Ah |
Standard discharge 0.2C after standard charge 0.2C |
| Minimum Capacity | 57Ah | |
| Nominal Voltage | 12.8V | |
| Life Expectation |
Higher than 80% of the Initial Capacity of the battery |
1)Charge:CC@0.2C to 14.6V, then CV till current to 0.05C |
|
Discharge cut-off voltage |
Module :9.2V~10.8V |
Recommended load cut-off voltage ≥11.2V |
| Charge cut-off voltage | 14.4V~14.6V | |
|
Cell and assembly method |
IFR32140 3.2V 15Ah | 4S4P |
| Housing material | ABS+PC | 94-V0 TopCover:gary,pq-coolgray7c Bottom case:blue PQ-295C |
| Standard charge |
0.2C constant current (CC) charge to 14.6V then constant voltage (CV) 14.6V charge till charge current decline to ≤0.05C |
Charge time : Approx 7h |
| Standard discharge |
Constant current 0.2C, Cut-off voltage 10.0V |
|
|
Maximum Charge Current |
30A@25℃±2℃ | (recommend)≤12A |
|
Maximum Continuous Discharge Current |
50A@25℃±2℃ |
Peak current 60A<10S |
|
Operation Temperature Range |
Charge: 0℃~45℃ |
0±25% R.H. |
|
Discharge: -20℃~60℃
|
||
|
Storage Temperature Range |
Less than 6 months : 0~25℃(SOC≥50%) |
60±25% R.H. |
|
Less than 3 months:-5~35℃(SOC≥50%) |
||
| Approx. Weight | 5.6kg±0.3kg | The sample housing is 3D printed. |
| Internal resistance | 5mΩ≤ACR≤20mΩ@50%SOC | 1KHz,AC |
| Dimension | L*W*H=(195*131.5*182.7mm)±2mm | |
| Terminals | M6*1.0 3.99±20%N.M |